BJM Shredder Pump SK15C-208T

Please contact us for price.

You can also reach out to us at 225-454-0860.


HP: 2

Voltage:  208, 3ph-60Hz

Rated Amps: 6.3

Discharge Connection: 3" NPT-M

Max Solids: 1.6"

Max Head: 42'

Max GPM: 220

Phase: 3


  • 304SS Motor Housing allows for superior abrasion resistance and will not wear out like aluminum motor housings when pumping sandy water.
  • Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber.
  • Winding protection and (NEMA) Class F motor insulation allows motor temperature to raise to 230°F, superior to pumps with Class A and B insulation. Automatic switch turns pump motor off if temperature and/or amp draw raises too high. When the motor cools the switch will automatically reset and the pump will turn back on.
  • Hardened cast iron stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components.
  • Standard 33ft. power cord.