BJM Shredder Pump SK22C-208T

  • $3,125.45


HP: 3

Voltage:  208, 3ph-60Hz

Rated Amps: 9.45

Discharge Connection: 3" NPT-M

Max Solids: 1.6"

Max Head: 45'

Max GPM: 270

Phase: 3


  • 304SS Motor Housing allows for superior abrasion resistance and will not wear out like aluminum motor housings when pumping sandy water.
  • Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber.
  • Winding protection and (NEMA) Class F motor insulation allows motor temperature to raise to 230°F, superior to pumps with Class A and B insulation. Automatic switch turns pump motor off if temperature and/or amp draw raises too high. When the motor cools the switch will automatically reset and the pump will turn back on.
  • Hardened cast iron stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components.
  • Standard 33ft. power cord.N